Max Headroom 
Tesla’s Cybercab has taken a significant step toward production with new technical details emerging from 2026 EPA certification documents.
The filings, which include a Certificate of Conformity issued in late May, provide the most comprehensive public look yet at the purpose-built autonomous vehicle designed for high-volume, low-cost ride-hailing operations.
At its core, the Cybercab is a front-wheel-drive electric vehicle powered by a single 163 kW (219 horsepower) AC permanent magnet motor. Despite its modest output, prioritizing efficiency and cost over neck-snapping acceleration, the vehicle boasts a strong power-to-weight ratio thanks to its lightweight curb weight of 3,113 pounds and a GVWR of 3,730 pounds.
It operates on a 326-volt electrical architecture with a compact ~48 kWh lithium-ion battery pack. The standout revelation is the vehicle’s exceptional efficiency, which Tesla has routinely flexed in the past.
EPA lab tests list an equivalent all-electric range of 418 miles combined and 375 miles on the highway. Tesla has previously targeted around 300 miles of real-world range, and analysts expect the final EPA-rated figure to land near 280-300 miles after adjustment factors.
At a certified 165 Wh/mi in earlier testing, the Cybercab is reportedly the most efficient EV ever produced, significantly outperforming vehicles like the Lucid Air Pure.
New information about @Tesla‘s Cybercab has been revealed in public EPA documents.
• Front-wheel drive
• Battery capacity: ~48 kWh
• 219 horsepower
• Curb weight: 3,113 lbs
• GVWR: 3,730 lbs
• Motor power: 163kW
• Voltage: 326vEquivalent All Electric Range is listed at… pic.twitter.com/D4gkJJTj25
— Sawyer Merritt (@SawyerMerritt) June 15, 2026
This efficiency stems from deliberate design choices tailored for robotaxi duty. The two-seater features a highly aerodynamic shape, minimal weight, which is aided by structural battery integration of what are likely 4680 cells, and no steering wheel or pedals in its fully autonomous configuration.
For ride-hailing fleets, where average trips are short, and can be just five or ten miles, the smaller battery enables faster charging cycles, lower material costs, and reduced vehicle price, a key to Tesla’s goal of a ~$30,000 production cost.
Implications for Autonomous Mobility
These specs underscore Tesla’s strategy: maximize utilization and minimize operating expenses. A ~48 kWh pack could support dozens of short rides per charge, with energy costs potentially dropping below 20 cents per mile at scale. Front-wheel drive simplifies manufacturing and maintenance compared to dual-motor AWD setups in passenger Teslas.
The 219 hp motor provides ample performance for urban and highway speeds without excess, addressing questions about why such power is needed in a “slow” autonomous vehicle. Quick merges and hill climbing still matter for safety and passenger comfort.
Production has already begun at Giga Texas, with EPA certification clearing the path for U.S. deployment. While unsupervised Full Self-Driving remains the critical hurdle, these details paint a compelling picture of a vehicle engineered from the ground up for the robotaxi future: affordable to build, cheap to run, and capable of delivering strong range on a fraction of the battery capacity found in today’s EVs.
As Tesla ramps toward volume output, the Cybercab could reshape urban transportation economics.
The post Tesla Cybercab specs revealed: range, curb weight, range ratings, and more appeared first on TESLARATI.
News, Tesla, Featured, Tesla Cybercab
TESLARATI
[crypto-donation-box type=”tabular” show-coin=”all”]
