Max Headroom 
UNCLASSIFIED
After two scrubbed attempts, SpaceX launched Starship V3 on Friday, May 22 from the brand new Pad 2 at Starbase, Texas, completing the most technically complex test flight the program has attempted and moving the bar in ways that matter for everything from commercial satellites to the first human Moon landing since 1972.
The Super Heavy booster lost an engine early during ascent and several more failed during its boostback burn, sending the stage into an off-nominal descent that ended in a hard landing in the Gulf of Mexico. SpaceX had planned a soft splashdown rather than a tower catch on this first V3 flight, so losing the booster was expected to be acceptable within the test parameters.
Ship 39 told a different story. The Starship upper stage reached its planned sub-orbital trajectory despite losing one of its vacuum Raptor engines, with the remaining engines compensating for the loss and keeping the vehicle on course. The spacecraft then survived atmospheric reentry, completed its belly-flip maneuver, and made a controlled upright splashdown in the Indian Ocean west of Australia.
Watch Starship’s twelfth flight test https://t.co/caRB1thMlg
— SpaceX (@SpaceX) May 22, 2026
The payload test is where Flight 12 separated itself from every previous Starship mission. SpaceX deployed 22 objects including 20 Starlink simulator satellites sized like next-generation V3 Starlink units, plus two specially modified satellites equipped with cameras that scanned Starship’s heat shield from orbit and transmitted imagery back to operators.
The broader significance of what was tested on Friday goes well beyond one mission. Every future Starship deployment, whether it is a batch of operational Starlink V3 satellites, cargo bound for the Moon, or eventually crew headed to Mars, depends on SpaceX being able to inspect and certify the heat shield quickly between flights. The camera-equipped satellites deployed on Flight 12 are the first step toward making that inspection process automated and data-driven rather than manual and time-consuming. If SpaceX can scan the heat shield from orbit after every reentry and flag damaged or missing tiles before the vehicle even lands, it fundamentally changes the turnaround time between flights. For a program that needs to refuel Starship in orbit using ten or more tanker launches before a single Moon mission can depart, launch cadence is everything. Friday’s payload test can be seen as building the maintenance infrastructure for rapid reusability.
Elon Musk took to X, following the successful tests, and noting: “Congratulations @SpaceX team on an epic first Starship V3 launch and landing!” “You scored a goal for humanity.”
The stakes behind that goal are concrete. NASA has selected Starship as the Human Landing System for Artemis IV, targeting a crewed Moon landing in 2028, and SpaceX has yet to demonstrate a full orbital flight, in-orbit refueling, or docking with an Orion capsule. Flight 12 proved V3 can fly, survive reentry, and deploy payloads under engine-out conditions. That is the foundation everything else has to be built on, and with a SpaceX IPO targeting June 2026, the timing of that proof of concept could not have been more useful.
The post Elon Musk called it Epic: The full story of SpaceX’s Starship Flight 12 appeared first on TESLARATI.
Elon Musk, Space, SpaceX, Featured, Mars, Moon, SpaceX Starship
TESLARATI
[crypto-donation-box type=”tabular” show-coin=”all”]
